3 Important Facts about Tuning up Your Furnace This Winter

The winter season is just a few weeks away, which means you can expect the days to get a bit colder in Temecula from now on. For many homeowners, dealing with the low temperatures this time of the year will usually lead to increased use of the furnace. 

Our heavy reliance on our heaters during the winter makes it even more important to look after their health and schedule regular maintenance throughout the year. If you haven’t done that, it’s not too late to get a tune-up for your furnace so that it’s ready to warm your home and keep you cozy for the winter. 

Why is a Furnace Tune-Up Necessary? 

We all recognize the importance of our furnace, especially when it helps heat our home during a frigid day. The significance of our heater means that homeowners must do all they can to keep it in stellar condition.

Like all our other appliances, heaters require regular maintenance to continue functioning at a high level without issue. Getting a furnace tune-up will benefit homeowners in numerous different ways as well, such as: 

  • Reduced energy costs: A well-functioning furnace is more energy-efficient, so your monthly utility bills will be cheaper if you take care of your heating system. 
  • Longer Lifespan: A heating system that constantly experiences performance issues will usually have a shorter lifespan. Keeping your heater free of issues will ensure that it stays healthy and lasts longer. 
  • Increased Safety: A properly maintained furnace is clean and free of dust and debris that could compromise heat-sensitive components. This reduces the risk of health hazards like fire and carbon monoxide poisoning.
  • Better Indoor Air Quality: A heater operating efficiently and as intended will keep debris and dust out of your home’s air, preserving indoor air quality. 

How Often Should You Get A Furnace Tune-Up?

Two tune-ups each year should be enough to keep your furnace at its best and running smoothly.  The ideal time of the year to get these tune-ups differs for everyone and will ultimately depend on your circumstances. However, if we did have to make a recommendation, we would suggest just before the start of spring and prior to the arrival of winter as good periods to consider for both of your maintenance appointments. 

Signs You Require a Furnace Tune-Up

  • Energy Bills Are More Expensive:  Sharp increases to your monthly bills without a clear explanation signal that your furnace is operating less efficiently and needs a tune-up. 
  • Foul Odors: A well-functioning furnace will never smell. A professional checkup is likely necessary if foul odors start coming from your heater. You could be dealing with a clogged air filter, dirt built-up, or an even more severe HVAC problem. 
  • Old Age: Heaters are more prone to performance problems and wear and tear as they age, making tune-ups even more helpful and necessary. 

Ensure your furnace makes it through the long winter uninterrupted by failing components or obstructive debris by turning to ProFlo HVAC for help. We offer heater maintenance and repair solutions to address any issue that gets in your furnace’s way. Our HVAC contractors will help preserve your heating system’s exceptional health and performance with their expertise and precise craftsmanship. As Temecula residents can attest, there isn’t a more trustworthy team to handle your furnace than ProFlo. See for yourself just how good our team is by turning to us for your next HVAC maintenance project and calling us at (951) 694-1300 or visiting us online.

4 Effective Ways to Minimize Water Damage When Your Plumbing Leaks

Water damage is one of the most common and sometimes devastating consequences a plumbing leak can bring. A severe case of water damage can wreak havoc on your home and necessitate extensive, costly repairs. That’s why when a plumbing leak occurs, Murrieta homeowners must take the necessary steps and measures to minimize water damage, preventing the substantial impact it can have. 

Disconnect Your Hoses

When a leak involves one of your outdoor plumbing fixtures, it’s not enough to just turn off the faucets throughout your property. You must also disconnect your hoses, as standing water in a hose can freeze and lead to a blockage in your sewer line. 

At its worst, a plumbing blockage can cause burst pipes, resulting in water flowing from your sewer line into your home. By disconnecting your hoses, you remove one way a clog can occur and eliminate the possibility of extensive water damage. 

Turn Off Your Water Main

When there’s a leak in your home, you should immediately turn off the water main so that water is no longer flowing to the various piping throughout your home. Failure to do so will allow copious amounts of water to seep out from areas where there is a leak, leading to considerable property damage. If you’re unaware of your water main’s location, now is the perfect time to familiarize yourself before a plumbing leak occurs. 

Clean Your Gutters

When functioning as intended, gutters help guide water off the roof and away from your home’s foundation. Unfortunately, gutters can also collect debris over time that, if left unaddressed, can prevent them from performing their role. 

Large amounts of water on your roof will eventually lead to leaks that can cause dangerous issues like foundation damage, structural problems and basement flooding. Avoid the potentially catastrophic water damage that can occur with a clogged gutter by cleaning it regularly and removing any debris found. 

Maintain Your Appliances

Appliances connected to the plumbing system are often to blame for any water damage in your home. That’s why regularly maintaining your appliances is necessary for homeowners. Doing so can minimize and even prevent potential water damage by reducing the chances of a leak. 

Whether it’s your refrigerator hoses or washing machine, getting your appliances maintained or repaired by a professional plumbing service will substantially benefit your sewer line. 

Ultimately, the best way to stop a plumbing leak from getting out of hand is by getting help from ProFlo without delay. ProFlo is an industry-leading source for timely plumbing maintenance and repair services that comprehensively and efficiently address whatever problem your sewer line is experiencing. ProFlo will get your sewer line back in stellar condition as if nothing had ever happened. Our sense of urgency and reliability make us the ideal partner to fulfill the plumbing needs of Murrieta residents. See the difference our plumbing services can make by calling us today at (951) 694-1300 to schedule an appointment or request a free estimate.

4 Helpful HVAC Maintenance Tips That Will Lower Your Heating Costs

As the winter season nears and colder weather becomes more frequent, you will likely use your heater more often to keep your home warm amidst the low temperatures. Unfortunately, increased heater usage usually means more expensive monthly bills and operating costs. If you’re not looking forward to the prospect of having to empty your wallet to use your heating system, regular HVAC maintenance for your heater can make it more efficient and lower the cost of using it. 

Check Your Thermostat

Part of looking after your heater should entail checking on your thermostat. Thermostats aren’t immune to old age and tend to be less effective at maintaining the temperature in your home as the years go by. This can lead to inefficient energy usage and raise the cost of your monthly bills. 

If you have an older thermostat that isn’t performing as well as it once did, it may be time to replace it with a newer model. Modern thermostats allow you to operate your heater more efficiently, lowering heating costs and saving you tons of money. 

Clean Your Ducts and Vents

Like other components of your heater system, your ducts and vents can collect dirt and debris over time. Homeowners will need to have them periodically cleaned by an HVAC maintenance service, as dirty ducts and vents can worsen indoor air quality and your heater’s performance. The last thing you want is a malfunctioning heater and to have to breathe in bacterial material or dusty debris because of unclean air ducts and vents. 

Switch Out Your Filters

Air filters do the dirty work for your HVAC system, preserving the indoor air quality of your home by trapping contaminants like dust, mold and dirt and preventing their spread. However, this can quickly get your filters dirty and allow them to become clogged with pollutants.  

A clogged air filter will disrupt airflow, causing your heater to be less efficient and forcing it to work harder to compensate. Not only do clogged filters mean poor energy usage and costly utility bills, but they also increase the likelihood of your heater breaking down and requiring repairs. 

Prevent this by regularly replacing your air filters before they get too dirty. Having an HVAC maintenance service switch out your filters every 60 to 90 days should preserve your heater and ensure that it continues to function smoothly. 

Clean the Blower

After replacing your air filters, your attention should turn to the blower. The blower, typically positioned behind your air filters, is prone to collecting dust, which can detract from your heater’s performance and efficiency. Hire an HVAC maintenance service to clean every aspect of your blower, including its pulleys and belts, so your heater can continue to warm your home without trouble. 

Maximize your heater’s efficiency while also reducing its operating costs by looking after its health with help from ProFlo HVAC. We offer heater maintenance and repair solutions that guarantee your unit’s long-term health and excellent performance. Our HVAC contractors are also the best in the business and will be able to diagnose and address any issue that may be present within your heating system. As seen in our work with the Murrieta, Temecula and Canyon Lake communities delivering quality craftsmanship and exceptional customer service, there isn’t a team better suited to oversee your HVAC project than ProFlo. See for yourself just how good our team is by turning to us for your next HVAC maintenance project and calling us at (951) 694-1300 or visiting us online.

4 Small Plumbing Problems That Could Require Major Plumbing Repairs

While minor plumbing problems may not have the same immediate impact as more severe issues like a pipe burst or sewer line collapse, they can worsen over time if left unaddressed and cause significant property damage. Even the smallest problems that appear harmless can evolve and require major, expensive repairs down the line. That’s why property owners must be wary of all plumbing issues and watchful for specific common sewer line problems that start small but can potentially lead to something more. 

Low or High Water Pressure

If you’re suffering from low water pressure, don’t just dismiss it as a simple inconvenience and go about your day. It can negatively affect the performance of your plumbing fixtures and even cause a sediment buildup in your pipes. We recommend having your plumbing system looked at when low water pressure starts becoming an issue because it sometimes serves as a signal for deeper problems like hidden leaks and sewer line damage. 

Overly high water pressure also shouldn’t be ignored by homeowners. When left allowed to persist, it can deteriorate the health of your pipes and damage your appliances. A weakened sewer line is especially problematic, as it becomes susceptible to more severe issues that will be costly to fix. 

Frequent Clogs

A drain clog from time to time isn’t anything to be alarmed at and is a common occurrence for all property owners. However, recurrent clogs should make homeowners uneasy as they often hint towards more severe plumbing issues like tree root intrusion or extensive material buildup within your pipes that could be causing the blockages. 

Find the exact cause of your frequent clogs by having a plumbing team assess your situation. Their assessment should allow you to pursue the proper solution for whatever plumbing problem you’re experiencing. 

Leaky Faucets

A faucet leak may not look like much, but it can result in extensive water waste and expensive monthly bills. Like other leaks, it can also lead to a buildup of water that allows for mold and mildew growth. The presence of mold won’t just leave foul odors that make your home an unpleasant setting but also is a health hazard that puts you and your family at risk. 

Ignoring a leaky faucet and allowing pools of water to accumulate can even damage areas of your property, like its tiles and carpet, forcing expensive repairs. Avoid this and the many other consequences of an unaddressed faucet leak by having it fixed as soon as possible by a professional plumbing service. 

Hard Water

Hard water coming from your plumbing fixtures is concerning because such water typically contains high levels of minerals, such as calcium and magnesium. These minerals can accumulate within your sewer line, causing clogged pipes, lower water pressure, and a performance dropoff in critical machinery like dishwashers and washing machines. Mineral buildup also increases the chances of a pipe burst, which can be a mess to deal with and expensive to fix. 

Neglecting to address even the most minor plumbing issues can lead to disaster and threaten the long-term health of your sewer line. Fortunately, ProFlo has your back as we offer world-class plumbing maintenance and repair services that serve as a solution for any problem that your sewer line experiences. ProFlo will keep your sewer line in excellent health and can be trusted because of our experience fulfilling the plumbing needs of Murrieta, Temecula and Canyon Lake residents. See the difference our plumbing services can make by calling us today at (951) 694-1300 to schedule an appointment or request a free estimate.

Residential Furnace Repair

5 Warning Signs That Your Furnace is Failing (And What to Do About Them)

Winter is coming, which means it’s time to start thinking about your furnace. If you’re like most homeowners, you probably don’t think about your furnace until it breaks down – and by then, it’s often too late. But knowing the warning signs that your furnace is failing can help you get ahead of the problem and avoid an expensive repair bill. In this blog post, we’ll talk about five warning signs that your furnace is failing and what you can do to fix it. So if you’re wondering whether or not your furnace is on its last legs, keep reading!

1. No Warm Air

If your home seems to be constantly cold, no matter what the weather is like outside, then it is likely that you have a failing furnace. This can result in colder-than-normal temperatures throughout your entire house, as well as areas of your home that seem to be much chillier than others.

One of the leading causes of a failing furnace is a problem with the motor. This makes it difficult for the heating system to generate enough power to adequately heat your home. Another potential cause is a problem with the pilot light or heat exchanger, which can prevent your furnace from functioning properly.

To avoid further complications, it is important to have your HVAC contractor inspect all aspects of your heating equipment and make any necessary repairs or replacements as soon as possible.

2. Increased Illness and Allergy Symptoms

Furnaces are crucial in maintaining healthy and comfortable indoor air quality in our homes. These systems are designed to filter out dust, dirt, bacteria, and other foreign particles, ensuring that the air we breathe is clean and safe. However, when a furnace begins to malfunction or break down, these harmful contaminants can build up and have adverse effects on the health of your family members.

Symptoms of poor indoor air quality due to an inefficient furnace can include increased allergies, colds, coughs, headaches, watery eyes, and itchy skin. If you notice any of these symptoms in yourself or your loved ones, it may be time to consider professional filter replacement or duct cleaning services. After taking such steps to restore proper airflow and airflow quality through your furnace system, you can rest assured that your home will once again be full of pure, clean air that supports the health and well-being of you and your family.

3. Loud Noises

When it comes to HVAC systems, it is common for components such as heaters and furnace units to make some noise during operation. While these noises may not be loud or particularly irritating, it is important to pay close attention to the sounds made by your heating equipment to identify when they become unusual or problematic.

A faulty heater or furnace tends to rattle, shake, and roll as a result of loose or worn-out mechanical components. If you notice that your furnace is making squealing, popping, or booming noises while operating, this may be an indication that it needs repair. Additionally, if your furnace makes no noise for some time after grinding and banging noises have been heard, it could indicate a serious problem that needs immediate attention.

To determine the source of any strange or unfamiliar noise from your HVAC system, it is best to consult a furnace repair expert who can accurately diagnose the issue based on the specific sound being produced. In addition, keeping track of any changes in furnace noise over time can help you know when it might be necessary to take action and schedule repairs before significant damage occurs. So if you notice any unusual sounds coming from your furnace or other heating equipment, don’t hesitate to contact a professional and find out what steps need to be taken to keep your home warm and comfortable year-round.

4. High Energy Bill

Heating and cooling in homes account for a significant portion of residential electricity usage, making it an important area to focus on when trying to reduce energy costs. One common reason that utility bills are high is that older furnaces may become inefficient over time. These furnaces may keep running even though they are not properly regulating the temperature in your home, resulting in unnecessarily high energy expenses.

To address this issue, one effective strategy is to regularly check the condition of your furnace filters. If these filters are dirty or clogged, airflow within your furnace can be obstructed, causing it to work harder than necessary and use more fuel. Alternatively, if the problem has already progressed beyond simply cleaning or replacing filters, you may need to consider replacing your old furnace with a newer model that is more energy efficient. Either way, taking steps to improve the performance of your heating and cooling systems can help you keep those high utility bills under control and save money in the long run.

5. The Age of your Furnace

When it comes to furnaces, it is important to choose a quality unit that will last for many years. A good quality furnace typically has a lifespan of up to 20 years or more, but the later years of that lifespan can often require more frequent repairs. When choosing an AC repair service for your furnace, it is important to work with one who has experience working with different types of furnaces, such as gas and electric units.

However, while a high-quality furnace may last for many years with minimal repairs needed, it is also important to do your calculations and determine whether the cost of those repairs is ultimately worth it. In some cases, furnace replacement may be the more cost-effective option, mainly if a repair costs more than 50 percent of the price of a new furnace.

Additionally, if you are finding yourself calling your repair person regularly due to ongoing issues with your furnace, this may be an indication that your heating equipment has reached its end-of-life and needs to be replaced. As such, if you are facing frequent repairs and nearing the age where a replacement would make sense financially, it might be time to consider replacing your old furnace with a new one.

Conclusion

While trying to fix the furnace on your own might be tempting, it’s always best to consult with a professional. They will have the experience and knowledge to help you assess the situation and make any necessary repairs. If you are experiencing any of the warning signs mentioned in this blog, don’t wait – contact us today for all your heating and air conditioning needs. We would be happy to help!